Last Modified: 11-29-2007 1.6 A
Service Category: Steering Section: Power Assist Systems
Model Year: 2008 Model: Sequoia Doc ID: RM000002H5G003X
Title: POWER ASSIST SYSTEMS: VANE PUMP (for 2UZ-FE): INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL VANE PUMP ASSEMBLY



(a) Install the vane pump assembly with the 2 bolts and nut.

Torque: 28 N·m (286 kgf·cm, 21 ft·lbf)

2. CONNECT PRESSURE FEED TUBE

(a) Install a new gasket to the pressure feed tube.

(b) Install the pressure feed tube with the union bolt .

Torque: 51 N·m (520 kgf·cm, 38 ft·lbf)

3. CONNECT SOLENOID VALVE CONNECTOR



(a) Connect the solenoid valve connector.

4. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR



(a) Connect the oil pressure sensor connector.

5. CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE



(a) Connect the hose with the clip.

6. INSTALL FAN AND GENERATOR V BELT 2UZ-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION (2008 Sequoia)+

7. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE 2UZ-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: INSTALLATION (2008 Sequoia)+

8. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY 2UZ-FE ENGINE CONTROL: THROTTLE BODY: INSTALLATION (2008 Sequoia)+

9. INSTALL NO. 1 ENGINE UNDER COVER 2UZ-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 Sequoia)+

10. ADD POWER STEERING FLUID

11. BLEED POWER STEERING FLUID POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: ON-VEHICLE INSPECTION (2008 Sequoia)+

12. INSPECT FOR POWER STEERING FLUID LEAK